Roland TR-606 KADI port

KADI port for Roland TR-606 allows you to control your TR-606 with MIDI in conjuction with a Pro KADI MkII.

See also 5 Audio Out socket kit for Roland TR-606.

£44.00 to £117.80 ex VAT
£52.80 to £141.36 inc VAT


PLEASE NOTE: Fitting a socket upgrade kit is a skilled job which should be undertaken only by a competent synth service engineer or fitted by us at our premises in Tadworth, just outside London.


This Socket upgrade adds a KADI port to the TR-606 enabling the individual sounds of the TR-606 to be played using KADI port output of any Kenton device which is fitted with a KADI port. These devices are:
Pro-2000 if fitted with the optional KADI port

All sounds can be played individually, with or without accent which is determined by a pre-set velocity level.
While the KADI port is connected to a KADI device the sounds can only be played from MIDI. When the KADI cable is unplugged (or the KADI device is turned off) the TR-606 will revert to normal operation. See the retrofit kit if you need more control.

The kit contains all necessary components and diagrams for connecting the wires / components, and mounting the 15 pin high density D socket.

Note 1): A KADI cable is not included, as this is supplied with the Pro-KADI or optional KADI add-on port for the Pro-2000 (although not with a Pro-4).

Note 2) This is a KADI Socket upgrade and is not what we call a retrofit. A retrofit kit typically offers a lot more control and features, unfortunately we do not produce a retrofit kit for the TR-606.

Note: Our socket kits are not intended for installation by the end user.
They should always be fitted by an experienced synth engineer.

More Info

More Links

What is MIDI to CV?

Solving MIDI Clock Problems


How to connect using our MIDI to CV Converters

Associated products