ARP Odyssey Mk2 (Black/Gold Face)

See also ARP Odyssey Mk1 (Grey Face) and ARP Odyssey Mk3 (Black/Orange Face) MIDI Retrofit Kits.

£325 ex VAT
£390.00 inc VAT

Description

Bring the power of MIDI to your ARP Odyssey Mk2 (Black/Gold Face).

The Kenton ARP Osyssey Mk2 MIDI Retrofit Kit gives you enhanced control over your ARP Odyssey Mk2 using MIDI, allowing you to control it from your DAW, sequencer or other controller. You can control notes, modulation, pitchbend, volume and the Odyssey’s LFO and filter cut-off. In addition, the Retrofit Kit gives you sustain and slide/portamento. See below for a full list of features.

THIS RETROFIT IS CURRENTLY ONLY AVAILABLE FULLY INSTALLED BY US AT OUR PREMISES IN TADWORTH, JUST OUTSIDE LONDON.

Features

  • Adds MIDI functionality to the ARP Odyssey, without changing the ARP Odyssey’s own functionality
  • Automatically switches between keyboard and MIDI control
  • Select any of the 16 MIDI channels
  • Controls note pitch, pitch-bend, modulation, filter cut-off, volume, sustain and slide/portamento
  • Built in LFO that can modulate VCO and filter cut-offs
  • Adds MIDI In and MIDI Thru sockets, and a push button for programming the Retrofit Kit
  • Setup is stored in non-volatile memory (EEPROM)

Incoming MIDI

  • Any MIDI channel can be selected
  • Notes (MIDI note numbers 36 – 96) – (transposable)
  • Pitchbend – range selectable between 2 semitones, a fifth or an octave
  • Aftertouch, Velocity and Pitchbend can be routed to control volume and filter cutoff
  • CC#1 (Mod Wheel) – controls the ARP Odyssey’s own LFO (can be set to control retrofit’s own MIDI-syncable LFO)
  • CC#7 (Volume) – Volume
  • CC#64 (Sustain On/Off) – sustains notes
  • CC#65 (Portamento On/Off) – controls glide (portamento) built into Retrofit Kit
  • CC#5 (Portamento Time) – controls glide (portamento) rate built into Retrofit Kit
  • CC#16 – controls the ARP Odyssey’s Low Pass Filter cutoff frequency
  • CC#12 – MIDI Retrofit Kit’s LFO MIDI Sync
  • CC#13 – MIDI Retrofit Kit’s LFO waveshape
  • CC#14 – MIDI Retrofit Kit’s LFO speed
  • CC#15 – MIDI Retrofit Kit’s LFO to VCO amount
  • CC#17 – MIDI Retrofit Kit’s LFO to Low Pass Filter cutoff amount
  • All of the above parameters can be assigned to different CCs
  • Pitchbend, Aftertouch and Velocity can be assigned to Volume and filter cut-offs

Added hardware

  • MIDI In, & Thru sockets
  • Push button (for programming the MIDI setup)

Kit Contents

The kit comprises the following items:

  • MIDI Circuit board – fits inside the ARP Odyssey
  • Small pack – DIN sockets and mounting hardware
  • Large pack – cable assemblies
  • User instructions – How to change from default settings and general instructions
  • Fitting instructions – step by step fitting instructions

All kits are fully checked and tested before despatch.

More Info

More Links

What is MIDI to CV?

Solving MIDI Clock Problems

FAQ’s

How to connect using our MIDI to CV Converters

Manuals