Killamix™ Mini firmware update
Description
Note: There are different formware updates available depending on the serial number of your Killamix Mini. Serial number 0781 onwards do not need updating. Ensure that you download the correct firmware update for your Killamix Mini.
Killamix Mini firmware history (up to serial number 0409 only)
|
||
| 04/11/2011 | 1031 |
Change – Continuum joystick mode changed from mode 2 to 1
|
|
15/10/2011
|
1030
|
Feature – Can now request firmware version number via SysEx</p>
Feature – Receive CCs for Encoders and Push Buttons mode – Mode 2 added where button leds ONLY respond to external controller information
Feature – Continuum mode added
|
| 01/01/2010 | 1022 |
Feature – Added Hi-Speed Encoder mode
Feature – Added Buttons Send MIDI Notes mode
Feature – Added Knobs Pressed Send Controller Messages mode
Feature – Added ability to offset CC#s
Fix – Receive CCs for Encoders and Push Buttons mode – buttons now only respond to incoming controllers if set to toggle mode
Fix – In Last Push Button Lights Button LED mode, any controller change for knobs blanked all buttons
Fix – Receive CCs for Encoders and Push buttons mode – two ON selections were allowed
Fix – can now have more than 1 Killamix Mini on macOS 10.5
|
|
10/06/2007
|
1014
|
Feature – Joystick mode: added switch mode
Fix – Improved error checking for firmware upgrades
Fix – Corrupt firmware upgrades not always rejected
Fix – Was sending CC#22 instead of CC#23 on exit from Button Setup mode
|
|
06/06/2007
|
1010
|
Feature – Button Setup mode added – On only, On/Off and Toggle modes
Feature – Config mode added at power up
Feature – Added Joystick mode with new 4 pole mode
Feature – Added Receive CCs for Encoders and Push buttons mode
Feature – Added Encoder Incremental mode with Doepfer mode
Feature – Encoder Incremental – added Ableton Signed 7 Bit mode
Feature – Received CCs now update knob positions and push buttons for all MIDI Channels
Feature – Button modes selectable for each MIDI channel.
Fix – Channel led flickering if controllers updated from external MIDI source
Change – Firmware upgrade routine now updates button to show only button #9 AFTER copy
Fix – Unit will not now lock up if no application has been opened to receive MIDI data
|
|
19/12/2006
|
1001
|
Fix – buttons send 127 (ON) on press only
|
Killamix Mini firmware history (serial numbers 0410 to 772 only)
|
||
| 04/11/2011 |
1104
|
Change – Continuum joystick mode changed from mode 2 to 1
Fix – Real-time bytes overwrote MIDI status
|
Killamix Mini firmware history (serial numbers 773 to 780)
|
||
|
15/03/2004
|
2017
|
Feature – Push buttons and LED Rings can have their brightness adjusted
|
