Firmware update for Pro 2000 mkI
This product cannot be re-flashed. An EPROM chip must be replaced to upgrade the firmware.
£18 ex VAT
£21.60 inc VAT
Description
The Pro 2000 mkI was replaced by mkII in March 2005. The mkI cannot be upgraded to mkII.
The firmware revision of the Pro 2000 mkI is briefly displayed whenever you turn the unit on. To display for longer, hold both the Inc & Dec buttons in while you power the unit on and keep them pressed until you have read the revision number.
Pro 2000 mkI firmware history |
||
22/01/2003 | KP2K4305.331 | Added 1 new clock divide ratio. 48 cpqn to enable you to sync Linndrum (already had 24 cpqn mode) |
18/01/2003 | KP2K4305.326 | Aux ranges now update when you change between programs |
31/01/1998 | KP2K4305.314 | Pitchbend setting range increased to 24 semitones / 128 note range for CV / reset all controllers recognised |
11/01/1998 | KP2K4305.200 | Sysex send & receive added |
06/01/1998 | KP2K4305.175 | All notes off recognised |
19/12/1997 | KP2K4305.048 | Auxes can now be CVs & Gates |
17/12/1997 | KP2K4305.023 | Auxes can now output trigger signal for ARP2600 |
17/07/1997 | KP2K4305.000 | Auto sync added |
11/06/1997 | KP2K4304.745 | New wavetable for triangle LFO to sync at top of wave instead of the middle |