KORG Monopoly

There are basically two options available for this model..

With an internal MIDI retrofit (polyphonic)
With a CV converter (monophonic)

Internal MIDI retrofit (polyphonic)

Click here for information about this retrofit
Click here to buy the retrofit including fitting by Kenton
Click here to buy the retrofit kit only

With a CV converter (monophonic)

You need either a Pro-Solo, USB-Solo, or a Pro-2000

You will need leads – this model has all 1/4″ jacks so you will need 3.5mm jack to 1/4″ jack leads
You will need at least 2 of these leads (for CV & Gate)
Plus optionally you may want leads for
Filter Cutoff control
Portamento control
clocking the arpeggiator

Connect as follows

Input on synthSkt typeConverter outputNotes
CV In 1/4″ jacktoCV Chan A(use 1 Volt/Octave on converter)
Trig In1/4″ jacktoGate(Set trig polarity of Monopoly to +15v – set converter to 15V Gate)
VCF fcM In 1/4″ jacktoAux(Adjust converter Aux max to give +5v)
Porta1/4″ jacktoAux(Adjust converter Aux max to give +5v)
Arpeggio Trig In1/4″ jacktoClk(Needs ‘inverted clock’ setting as clocks on ‘falling edge’)

Click here for information about and to buy the Pro-Solo mkII

Click here for information about and to buy the Pro-2000 mkII

Click here for 3.5mm jack to 1/4″ lead