Find out how you can control your Roland Juno-6 with MIDI using Kenton MIDI Retrofit Kits or MIDI to CV converters
The Juno-6 does not have MIDI or CV/Gate. It does however have an Arpeggio Clock In 1/4″ jack socket. Kenton offer a variety of options for your Juno-6:
- Fit a MIDI Retrofit Kit
- Clock the Arpeggiator
Fitting a MIDI Retrofit Kit is a skilled job which should be undertaken only by a competent synth service engineer or fitted by us at our premises in Epsom, near London (UK customers only).
1. Fit a MIDI Retrofit Kit to the Juno-6
You can fit a MIDI Retrofit Kit which will allow you to control the Roland Juno-6 directly using MIDI from your DAW, MIDI Sequencer or other MIDI controller. Fitted inside your Juno-6, our MIDI Retrofit Kit adds MIDI IN and THRU sockets.
With the Retrofit Kit you’ll have MIDI control of Notes, Pitchbend, Modulation, Filter cutoff, Volume, Portamento / Glide, Sustain. You will also be able to clock the arpeggiator using the MIDI clock. Note that the retrofit is MIDI IN and THRU only, there is no MIDI Out.
Roland Juno-6 MIDI Retrofit Kit
2. Clock the Arpeggiator
You can use one of our MIDI converters to clock the Juno-6’s arpeggiator using MIDI clock – see Clocking the arpeggiator of your synthesiser for more information.
Solving MIDI Clock Problems
If you have issues with clocking the arpeggiator, please refer the troubleshooting guide here: Solving MIDI clock problems.
